Tempe Roofing Pros provides professional wind & microburst roof repair in Tempe, AZ for residential and commercial properties across the East Valley. Microburst outflow is the wind that matters in Tempe, and it arrives as a wall rather than a gust front. Sixty to eighty miles per hour for a few minutes, loaded with dust, hitting parapets and equipment screens far harder than it hits the open field.
That geometry is why a properly adhered foam roof rarely peels. There is no lap for wind to get under and no fastener pattern to unzip, so uplift concentrates where the assembly changes: the edge metal, the gravel stop, the parapet cap, and the sheet metal screens around rooftop equipment. Fix the perimeter and the field usually looks after itself. That is a cheaper roof to own, provided somebody actually maintains the edge.
We check that edge first, by hand. Loose cleats, cap screws backed out of failing stucco, counterflashing pulled away from a parapet, and coating cracked along a termination bar are all uplift signatures, and all of them are cheap to repair before they become the reason the next storm removes twenty feet of edge metal. None of it is visible from the ground, which is why it goes unfixed.
Debris is the other half of wind damage here. Palm fronds, patio furniture, and dislodged screen panels skate across a low-slope roof and score the coating on the way, and a scored coating is an exposed foam roof in a place with some of the highest ultraviolet exposure in the country. Those cuts get sealed the same week rather than the next quarter. Sealing a cut costs a few dollars of material and an hour.
On the steep sections we look for lifted first courses at rakes and eaves, since that is where wind gets its first purchase, and for broken pieces on any tile field on the property. What we will not do is convert a handful of loose edge fasteners into a replacement proposal. A loose fastener is a fastener, and it gets quoted as one. Replacement proposals should have to earn themselves.
Everything is documented with the storm date, the wind direction we can read off the damage pattern, and photographs taken from the same points every visit. If a claim follows, that record is what carries it, and if no claim follows you still own a baseline for next season. Damage patterns fade from memory long before a claim is settled.
Our licensed and insured team brings the right materials and equipment to every job — sprayed polyurethane foam at three-pound density, acrylic elastomeric coating meeting ASTM D6083, high-solids silicone topcoat, dry film thickness measured in mils, electronic capacitance moisture survey, dusk infrared thermography scan — and backs the work with a written workmanship warranty. We serve Tempe and nearby communities including Mesa, Chandler, Gilbert, Scottsdale.
What We Handle
Everything our wind & microburst roof repair in Tempe covers
One crew, one point of contact, and the full range of wind & microburst roof repair work in Tempe, AZ. If it is on this list we do it in house rather than handing it to a subcontractor:
- wind damage roof repair
- microburst roof damage
- roof uplift damage
- edge metal repair
- parapet cap repair
- wind damaged roof Tempe
- loose roof flashing
- blown off roof section
- roof perimeter uplift
- wind damage on roof
- storm wind roof repair
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Tempe services.
Materials, equipment and how we do wind & microburst roof repair
The difference between wind & microburst roof repair that lasts and wind & microburst roof repair that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with sprayed polyurethane foam at three-pound density, acrylic elastomeric coating meeting ASTM D6083, high-solids silicone topcoat, dry film thickness measured in mils, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Tempe job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the East Valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do wind & microburst roof repair outside Tempe
Tempe Roofing Pros covers Tempe and the surrounding communities of the East Valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Wind & Microburst Roof Repair in Mesa, AZ — Maricopa County, population 504,258
- Wind & Microburst Roof Repair in Chandler, AZ — Maricopa County, population 275,987
- Wind & Microburst Roof Repair in Gilbert, AZ — Maricopa County, population 267,918
- Wind & Microburst Roof Repair in Scottsdale, AZ — Maricopa County, population 241,361
- Wind & Microburst Roof Repair in Phoenix, AZ — Maricopa County, population 1,608,139
- Wind & Microburst Roof Repair in Queen Creek, AZ — Maricopa County, population 59,519
Start on the Tempe Roofing Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Tempe Chooses Tempe Roofing Pros
- ✓Every coating proposal names the product, its ASTM standard and the dry film thickness in mils, never a gallon count
- ✓Core cuts and an electronic moisture scan before a recoat is priced, because coating over wet foam buys nothing
- ✓Thickness readings taken at the same marked points every visit, so you see a wear rate instead of one afternoon's opinion
- ✓Ponding corrected by building slope in foam rather than patched with more material at the low spots
The standards behind wind & microburst roof repair
Quality here is not a matter of opinion — it is written down. The wind & microburst roof repair work we do in Tempe follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every wind & microburst roof repair project in Tempe gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free wind & microburst roof repair free estimate in Tempe, or request a quote and we'll get right back to you.