Tempe Roofing Pros provides professional metal roofing in Tempe, AZ for residential and commercial properties across the East Valley. Metal earns its place in Tempe on the small stuff. Patio covers, carports, additions, and awnings that live in full sun all year, where a standing seam panel outlasts anything else you could put over them and asks for almost nothing in between.
On a flat main roof it is usually the wrong purchase, and we say that before you have paid for a design. Making metal work on a dead-flat plane means building a sub-purlin frame to create slope, and once you are paying for framing you are almost always better off spraying foam to build the same slope for less money and no fasteners. Spending framing money to avoid a coating cycle rarely pencils out.
The distinction that matters most is concealed fastener against exposed. Standing seam panels clip to the deck and let the metal move, which is what you want when a panel expands across a hundred-degree daily swing. Exposed-fastener panels rely on a neoprene washer under every screw, and washers do not survive this ultraviolet exposure for decades. Movement is the whole design problem with metal in this climate.
So an exposed-fastener roof is a ten-year gasket wearing a forty-year panel. It is cheaper today, and it commits you to walking the roof and retorquing screws, then eventually to replacing several hundred of them. We install them when a budget requires it, with that maintenance schedule written into the proposal instead of left out of the conversation. A maintenance item you know about is not a defect, and one you discover is.
Where metal does go on a low-slope retrofit, the details carry it: closures at every panel end, oversized slip connections on long runs, butyl tape at every lap, and clips spaced for perimeter uplift rather than at the field spacing. Panels here move enough that a rigid attachment will tear its own holes open. Long panel runs want expansion designed in rather than assumed away.
Twenty-four gauge steel with a Kynar-based finish holds colour in this sun far better than the thinner painted panels sold for agricultural use, and the difference shows up in about five summers. If a roof is going to be visible from the street for thirty years, that is where the money belongs. Panel gauge and coating chemistry are worth reading on the submittal before anything is ordered.
Our licensed and insured team brings the right materials and equipment to every job — sprayed polyurethane foam at three-pound density, acrylic elastomeric coating meeting ASTM D6083, high-solids silicone topcoat, dry film thickness measured in mils, electronic capacitance moisture survey, dusk infrared thermography scan — and backs the work with a written workmanship warranty. We serve Tempe and nearby communities including Mesa, Chandler, Gilbert, Scottsdale.
What We Handle
Everything our metal roofing in Tempe covers
One crew, one point of contact, and the full range of metal roofing work in Tempe, AZ. If it is on this list we do it in house rather than handing it to a subcontractor:
- metal roofing
- standing seam metal roofing
- metal roofing near me
- metal roof installation
- exposed fastener panels
- 24 gauge steel roofing
- metal patio cover roof
- metal roofing cost
- Kynar finish metal roof
- corrugated metal roofing
- metal roofing Tempe
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Tempe services.
Materials, equipment and how we do metal roofing
The difference between metal roofing that lasts and metal roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with sprayed polyurethane foam at three-pound density, acrylic elastomeric coating meeting ASTM D6083, high-solids silicone topcoat, dry film thickness measured in mils, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Tempe job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the East Valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do metal roofing outside Tempe
Tempe Roofing Pros covers Tempe and the surrounding communities of the East Valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Metal Roofing in Mesa, AZ — Maricopa County, population 504,258
- Metal Roofing in Chandler, AZ — Maricopa County, population 275,987
- Metal Roofing in Gilbert, AZ — Maricopa County, population 267,918
- Metal Roofing in Scottsdale, AZ — Maricopa County, population 241,361
- Metal Roofing in Phoenix, AZ — Maricopa County, population 1,608,139
- Metal Roofing in Queen Creek, AZ — Maricopa County, population 59,519
Start on the Tempe Roofing Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Tempe Chooses Tempe Roofing Pros
- ✓Every coating proposal names the product, its ASTM standard and the dry film thickness in mils, never a gallon count
- ✓Core cuts and an electronic moisture scan before a recoat is priced, because coating over wet foam buys nothing
- ✓Thickness readings taken at the same marked points every visit, so you see a wear rate instead of one afternoon's opinion
- ✓Ponding corrected by building slope in foam rather than patched with more material at the low spots
The standards behind metal roofing
Quality here is not a matter of opinion — it is written down. The metal roofing work we do in Tempe follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every metal roofing project in Tempe gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free metal roofing free estimate in Tempe, or request a quote and we'll get right back to you.