Tempe Roofing Pros provides professional monsoon & storm damage repair in Tempe, AZ for residential and commercial properties across the East Valley. Monsoon season runs from the middle of June to the end of September, and it does not damage roofs the way a frontal storm does. An outflow boundary arrives with dust and sixty-mile-per-hour gusts, then drops an inch of rain in twenty minutes onto a roof with almost no slope.
Two failures follow from that. Debris driven across the field cuts and abrades the coating, exposing bare foam that begins to break down in sunlight within days. And the water that cannot leave fast enough stands over the low spots, finds any cut, and works into the cells while the roof is still warm from the afternoon. Both failures start at the coating and end in the foam.
So the order of operations matters more than the speed. We get standing water off first with a pump and squeegees, then dry and scan before anything is coated over, because coating traps moisture and a trapped pound of water in foam becomes a blister the following July. Drying comes before sealing, without exception. A blister cut open in year two is a repair, and ignored it is a re-spray.
Then we deal with the drainage that let it happen. Blocked internal drains, scuppers set above the water line, and dust-packed strainers are the usual culprits, and the fix is often as simple as lowering a scupper throat or cutting an overflow at the parapet so the next inch has somewhere to go besides your ceiling. Capacity, not tightness, is what gets tested by a monsoon cell.
Restoration is not the same as recoating. If the coating was already thin and chalked before the storm, the storm did not cost you a roof, it revealed one, and we will separate those two things in writing rather than letting a monsoon date carry work that ordinary wear caused. That distinction matters a great deal if a claim is involved. An honest scope beats a generous one that falls apart under review.
Blown-down debris, damaged equipment screens, and dislodged edge metal get photographed with the date and the location on the roof plan before we touch any of it. That record is worth more to you later than a same-day patch, and it costs nothing to make while the crew is up there anyway. Photographs taken before cleanup cannot be reconstructed afterwards, which is the whole point of taking them first.
Our licensed and insured team brings the right materials and equipment to every job — sprayed polyurethane foam at three-pound density, acrylic elastomeric coating meeting ASTM D6083, high-solids silicone topcoat, dry film thickness measured in mils, electronic capacitance moisture survey, dusk infrared thermography scan — and backs the work with a written workmanship warranty. We serve Tempe and nearby communities including Mesa, Chandler, Gilbert, Scottsdale.
What We Handle
Everything our monsoon & storm damage repair in Tempe covers
One crew, one point of contact, and the full range of monsoon & storm damage repair work in Tempe, AZ. If it is on this list we do it in house rather than handing it to a subcontractor:
- storm damage roof repair
- monsoon roof damage
- storm roof damage
- roof storm restoration
- ponding water flat roof
- debris damage roof
- roof damage from storm
- storm damage roof inspection
- water removal flat roof
- roof drain blockage
- storm roof repair Tempe
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Tempe services.
Materials, equipment and how we do monsoon & storm damage repair
The difference between monsoon & storm damage repair that lasts and monsoon & storm damage repair that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with sprayed polyurethane foam at three-pound density, acrylic elastomeric coating meeting ASTM D6083, high-solids silicone topcoat, dry film thickness measured in mils, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Tempe job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the East Valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do monsoon & storm damage repair outside Tempe
Tempe Roofing Pros covers Tempe and the surrounding communities of the East Valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Monsoon & Storm Damage Repair in Mesa, AZ — Maricopa County, population 504,258
- Monsoon & Storm Damage Repair in Chandler, AZ — Maricopa County, population 275,987
- Monsoon & Storm Damage Repair in Gilbert, AZ — Maricopa County, population 267,918
- Monsoon & Storm Damage Repair in Scottsdale, AZ — Maricopa County, population 241,361
- Monsoon & Storm Damage Repair in Phoenix, AZ — Maricopa County, population 1,608,139
- Monsoon & Storm Damage Repair in Queen Creek, AZ — Maricopa County, population 59,519
Start on the Tempe Roofing Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Tempe Chooses Tempe Roofing Pros
- ✓Every coating proposal names the product, its ASTM standard and the dry film thickness in mils, never a gallon count
- ✓Core cuts and an electronic moisture scan before a recoat is priced, because coating over wet foam buys nothing
- ✓Thickness readings taken at the same marked points every visit, so you see a wear rate instead of one afternoon's opinion
- ✓Ponding corrected by building slope in foam rather than patched with more material at the low spots
The standards behind monsoon & storm damage repair
Quality here is not a matter of opinion — it is written down. The monsoon & storm damage repair work we do in Tempe follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every monsoon & storm damage repair project in Tempe gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free monsoon & storm damage repair free estimate in Tempe, or request a quote and we'll get right back to you.