Tempe Roofing Pros provides professional roof replacement in Tempe, AZ for residential and commercial properties across the East Valley. Most Tempe houses that need a new roof do not need a tear-off. Much of the stock here is low-slope with sprayed polyurethane foam over the original deck, and foam that is still dry is the substrate for the next roof rather than debris to be hauled away.
So the first question is whether the assembly is dry, and that is answered with a core cut rather than an opinion. We pull two-inch plugs at the low points, read the foam density and the layers underneath, and check whether water ever reached the plywood or the lightweight concrete. Three dry cores and a sound bond mean you are buying a recover. It is better to learn that on day one than halfway through a tear-off.
A recover on that roof means grinding off the chalked coating, cutting out the saturated patches down to good foam, spraying new foam to correct the ponding areas, and coating the whole field to one measured thickness. You get a monolithic surface with no seams, a corrected slope, and a warranty term that starts over. You do not get a dumpster in the driveway for a week. Most of that happens on the roof, not in your driveway.
A full tear-off is the honest answer when the cores come up soaked, when the foam has debonded across wide areas, or when four inches of accumulated patch material have buried the drains and the roof no longer sheds anywhere at all. We tell you that before you have spent anything, and we show you the wet cores rather than describing them over the phone. Nobody enjoys that conversation, and it is cheaper than the alternative.
On the steep-slope sections, usually the original framing over the living space, the specification is written around heat instead of rain. Surface temperatures sit far above ambient for months here, so we use high-temperature synthetic underlayment rated for that exposure, the manufacturer's high-wind fastening pattern, and eave and ridge details that tolerate a summer of daily thermal movement. Ventilation and flashing details get corrected while the deck is open, not reinstalled as found.
Every proposal names the foam density, the coating product and its ASTM standard, the dry film thickness in mils, and the warranty term tied to that thickness. A bid that says only white coating and a total is asking you to trust a gallon count that nobody will ever go back and verify. Mils can be verified after the fact and gallons cannot, which is exactly why one number belongs in a proposal.
Our licensed and insured team brings the right materials and equipment to every job — sprayed polyurethane foam at three-pound density, acrylic elastomeric coating meeting ASTM D6083, high-solids silicone topcoat, dry film thickness measured in mils, electronic capacitance moisture survey, dusk infrared thermography scan — and backs the work with a written workmanship warranty. We serve Tempe and nearby communities including Mesa, Chandler, Gilbert, Scottsdale.
What We Handle
Everything our roof replacement in Tempe covers
One crew, one point of contact, and the full range of roof replacement work in Tempe, AZ. If it is on this list we do it in house rather than handing it to a subcontractor:
- roof replacement
- roof replacement Tempe
- re-roofing
- roof recover
- tear-off roofing
- new roof cost
- foam roof replacement
- low-slope roof replacement
- roof deck repair
- residential re-roof
- roof replacement estimate
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Tempe services.
Materials, equipment and how we do roof replacement
The difference between roof replacement that lasts and roof replacement that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with sprayed polyurethane foam at three-pound density, acrylic elastomeric coating meeting ASTM D6083, high-solids silicone topcoat, dry film thickness measured in mils, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Tempe job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the East Valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do roof replacement outside Tempe
Tempe Roofing Pros covers Tempe and the surrounding communities of the East Valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Roof Replacement in Mesa, AZ — Maricopa County, population 504,258
- Roof Replacement in Chandler, AZ — Maricopa County, population 275,987
- Roof Replacement in Gilbert, AZ — Maricopa County, population 267,918
- Roof Replacement in Scottsdale, AZ — Maricopa County, population 241,361
- Roof Replacement in Phoenix, AZ — Maricopa County, population 1,608,139
- Roof Replacement in Queen Creek, AZ — Maricopa County, population 59,519
Start on the Tempe Roofing Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Tempe Chooses Tempe Roofing Pros
- ✓Every coating proposal names the product, its ASTM standard and the dry film thickness in mils, never a gallon count
- ✓Core cuts and an electronic moisture scan before a recoat is priced, because coating over wet foam buys nothing
- ✓Thickness readings taken at the same marked points every visit, so you see a wear rate instead of one afternoon's opinion
- ✓Ponding corrected by building slope in foam rather than patched with more material at the low spots
The standards behind roof replacement
Quality here is not a matter of opinion — it is written down. The roof replacement work we do in Tempe follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every roof replacement project in Tempe gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free roof replacement free estimate in Tempe, or request a quote and we'll get right back to you.